Main Products

FASTENERS THREADED ROD (STUD BOLT) Size: M6 to M64 or 1/4 inch to 3 inch. Material: class 4.8, class 8.8, class 12.9, Grade2, grade 5 and grade 8. ASTM A193 B7, B7M, B8, B8M. BRASS Specification: Din 975, ANSI B1.1 Length: 50mm to 4000mm or 2 inch to 12 (12 feet) Finish: Plain, zinc plated, hot dip galvanized, black. Our advantage: Thread rolling after heat-treatment for high strength products. It can guarantee the excellent performance of thread. HEX BOLT Size: M5 to M64 or 1/2inch to 4inch Material: class 4.8, class 8.8, class 12.9, grade 2, grade 5 and grade 8. ASTM A193 B7, B8,B8M, ASTM A325, A490, Specification: ANSI B18.2.1, ANSI B18.2.6, DIN931 and DIN933. ISO 4014 Finish: Zinc plated, hot-dipped galvanized (HDG), plain, dacromet HEX NUT Size: M5 to M64 or 1/2inch to 4inch Material: ASTM A194 2H, ASTM A563, ASTM A194 Gr.8, ASTM A194 Gr. 8M,Class 4,Class 8,Class 10 Specification: ANSI B 18.2.2, DIN 934, DIN439, AS1252 Finish: Plain, zinc plated, hot dip galvanized, black, dacromet WASHER Size: M3-M76 Type: Flat washer and Spring Washer Material: Carbon Steel and Stainless Steel. Specification: DIN125, DIN9021, DIN 127, DIN 7980. ASTM F436, ANSI B 18.22.1, ANSI B18.21.1, SAS, and USS and non-standard washers etc Finish: Plain, zinc plated, hot dip galvanized, black, dacromet FORGED FLANGES Material: Carbon steel: ASTM A105, ASTM A350 LF2, ASTM A694 F52/F60/F65 , Stainless steel: ASTM A182 F304/304L, ASTM A182 F316/316L Specification: ANSI B16.5, ANSI B16.47 A (MSS SP-44),ANSI B16.47 B, ANSI B16.48, ANSI B16.36/API 6A/DIN 2512, 2519, 2526, 2527, 2566, 2573, 2576,2631, 2632, 2633, 2634, 2635, 2641, 2642, 2655, 2656, 2673,/EN1092/JIS Type: Slip On (SO), Weld Neck (WN), Socket Weld (SW), Blind (BL), Lap Joint (LJ), Orifice Flanges, Spectacle Blind flanges and so on. Facing: RF (Raised Face), FF (Flat Face) and RTJ (Ring Type Joint) Pressure Rating: from 150 to 2500 lbs. From PN 6 to 320 Bar Size: from 1/2inch to 72inch PIPE FITTINGS BUTTWELDING PIPE FITTINGS TYPE: Elbows (45 degree, 90 degree and 180 degree), Equal Tee, Reducing tee, Concentric reducer and Eccentric reducer, Cap, Cross and so on. Size: 1/2 inch to 24 inch for seamless and 26 inch to 60 inch for welded. Material: Carbons steel: ASTM A234 WPB, Stainless steel: ASTM A403 WP 304/304L, ASTM A403 WP 316/316L, Duplex stainless steel: ASTM A815 UNS S31803, Specification: ASME B16.9/16.28. Thickness: SCH10(S), SCH20, STD, SCH40(S), SCH80(S), SCH160

The Most Competitive Products

FASTENERS THREADED ROD (STUD BOLT) Size: M6 to M64 or 1/4" to 3". Material: class 4.8, class 8.8, class 12.9, Grade2, grade 5 and grade 8. ASTM A193 B7, B7M, B8, B8M. BRASS Specification: Din 975, ANSI B1.1 Length: 50mm to 4000mm or 2" to 12' (12 feet) Finish: Plain, zinc plated, hot dip galvanized, black. Our advantage: Thread rolling after heat-treatment for high strength products. It can guarantee the excellent performance of thread. HEX BOLT Size: M5 to M64 or 1/2" to 4" Material: class 4.8, class 8.8, class 12.9, grade 2, grade 5 and grade 8. ASTM A193 B7, B8,B8M, ASTM A325, A490, Specification: ANSI B18.2.1, ANSI B18.2.6, DIN931 and DIN933. ISO 4014 Finish: Zinc plated, hot-dipped galvanized (HDG), plain, dacromet HEX NUT Size: M5 to M64 or 1/2" to 4" Material: ASTM A194 2H, ASTM A563, ASTM A194 Gr.8, ASTM A194 Gr. 8M,Class 4,Class 8,Class 10 Specification: ANSI B 18.2.2, DIN 934, DIN439, AS1252 Finish: Plain, zinc plated, hot dip galvanized, black, dacromet WASHER Size: M3-M76 Type: Flat washer and Spring Washer Material: Carbon Steel and Stainless Steel. Specification: DIN125, DIN9021, DIN 127, DIN 7980. ASTM F436, ANSI B 18.22.1, ANSI B18.21.1, SAS, and USS and non-standard washers etc Finish: Plain, zinc plated, hot dip galvanized, black, dacromet