螺母
Back
滚花螺母
Location
Gold Suppliers
Country/Region:
China/Guangdong
Main Products
non-standard fasteners, machine screws, self-tapping screws, insert nuts, rivets, hollow bolts & nuts.
Gold Suppliers
Country/Region:
China/Zhejiang
Main Products
Main products: High strength standard and non-standard parts for automobiles and motor-cycles, and others. Especially, wheel bolt,wheel nuts,flange bolts,flange nuts,hex head bolt,screws,self-tapping screws,hex nuts,anchor bolts,special fastener,etc. Main grade 8.8 and up.
Gold Suppliers
Country/Region:
China/Zhejiang
Main Products
Various non-standard fasteners,Full range of non-standard nuts
Country/Region:
China/Zhejiang
Main Products
Dowel pins, clevis pins, spring pins, taper pins, grooved pins, split pins, keys, washers, circlips DIN1 DIN7 DIN94 DIN6325 DIN7979 DIN7978 DIN258 DIN1435 DIN1444 DIN1481 DIN1470 DIN1471 DIN1472 DIN1473 DIN1475 DIN1476 DIN1477 DIN6885 DIN6888 ISO8734 ISO2341 ISO8752
Country/Region:
China/Guangdong
Main Products
Threaded Inserts and Studs for Plastic Mouldings, Direct Screw Fixings for Plastics and Light Alloys, Sheet Metal Fasteners etc. panel captive screws, panel fasteners assembly, spring-loaded plungers, ball plungers, spring plungers, hand retractable plungers, press fit plungers, thumb screws, captive nuts, self-clinching nuts, self-locking nuts, broaching nuts, cage nuts, flate-in nuts, rivet nuts, welded nuts, self-clinching standoffs, broaching stand-offs, flush fasteners, spacers, Jack screws, studs, threaded inserts for plastic, knurled nuts and screws, pins, latches, rings, handles and ferrules, self clinching cable tie mounts and hooks, CAM locks, and other precision turn parts by your request specially. Square nuts, hexagon nuts, hexagon thick nuts, wing nuts, ring nuts, acorn nuts, hexagon nuts with raised face, tight nuts, knurled nuts with collar, knurled thin nuts, small hexagon thin nuts-Fine pitch thread, Insert round nuts, small round nuts, round nuts, round nuts with drilled holes in one face, round nuts with set pin holes in side, Slotted round nuts, hexagon nuts with non-metallic insert, acorn nuts, hexagon thin nuts, hexagon slotted nuts, hexagon slotted thin nuts, hexagon flange lock nuts with non-metallic insert, all-metal hexagon lock nuts, all-metal hexagon flange lock nuts, hexagon slotted thin nuts, square weld nuts, hexagon weld nuts,insert nut for plastic,Rivit,Turning Parts,cutting Parts ,Brass nut,Fasteners. Emhart,SPIROL,Tappex,Simaf,Kerb-Konus,RAF,AVK,Abbott-interfast,Allfast,Tri-Star,SFP,Shardley,PSM,Captive fastener,Bollhoff;threaded nut,knurled nut,turning parts,panel captive screws, panel fasteners assembly, spring-loaded plungers, ball plungers, spring plungers, hand retractable plungers, press fit plungers, thumb screws, captive nuts, self-clinching nuts, self-locking nuts, broaching nuts, cage nuts, flate-in nuts, rivet nuts, welded nuts, self-clinching standoffs, broaching stand-offs, flush fasteners, spacers, Jack screws, studs, threaded inserts for plastic, knurled nuts and screws, pins, latches, rings, handles and ferrules, self clinching cable tie mounts and hooks, CAM locks, and other precision turn parts by your request specially. Threaded Inserts and Studs for Plastic Mouldings, Direct Screw Fixings for Plastics and Light Alloys, Sheet Metal Fasteners etc. Square nuts, hexagon nuts, hexagon thick nuts, wing nuts, ring nuts, acorn nuts, hexagon nuts with raised face, tight nuts, knurled nuts with collar, knurled thin nuts, small hexagon thin nuts-Fine pitch thread, Insert round nuts, small round nuts, round nuts, round nuts with drilled holes in one face, round nuts with set pin holes in side, Slotted round nuts, hexagon nuts with non-metallic insert, acorn nuts, hexagon thin nuts, hexagon slotted nuts, hexagon slotted thin nuts, hexagon flange lock nuts with non-metallic insert, all-metal hexagon lock nuts, all-metal hexagon flange lock nuts, hexagon slotted thin nuts, square weld nuts, hexagon weld nuts
Country/Region:
China/Zhejiang
Main Products
brass hex nuts brass cap nuts brass bolts brass screws brass washers brass precise hardware stainless steel nuts
Country/Region:
China/Zhejiang
Main Products
wing nuts, wing bolts, K nuts,Cage nuts,metral-lock nuts,hex nuts,nylon lock nuts,flange nuts,weld nuts,square nuts,cap nuts,round nuts,Tam shield anchor,set screw,hex bolts,etc DIN934/985/982/1587/980/315/557/928/929/6923/913/914/916/986
Country/Region:
China/Guangdong
Main Products
Self-clinching fasteners, precision turning parts, panel fasteners, self-locking fasteners, screws and nuts, SEMS screws, rivets, shaft, Captive screws,standoffs, spacers, springs and other electronic hardware such as nylon and rubber parts.
Country/Region:
China/Guangdong
Main Products
Self-clinching Nuts: Self-clinching nuts, Self-clinching standoff, Self-clinching studs, Kalei Nuts, Rivet Bush, Welding Fastners, Brass Inserts, Male-Female standoff, Self-clinching locknuts, Self-clinching fasteners, Floating fasteners, Miniature fasteners, Hexagonal self-clinching nut, Self-locking fasteners, PSM nuts,PCB nuts, broaching type nuts etc. Self-clinching Standoffs: Blind fasteners, thru-hole/thread standoffs, threaded standoff for thin sheet, Blind threaded standoffs, connector ware fasteners, concealed-head standoffs, Snap-top standoffs, keyhole standoffs, broaching standoffs; Self-clinching Studs: Self-clinching non-flush studs, self-clinching flush-head studs, broaching type studs; Inserts for plastic: Ultrasonic/heat staking inserts, molded-in inserts, Press-in inserts; Others: Male-female standoffs, Panel fasteners, panel fastener assembled, panel access hardware, orders, shaft, precise turned products.
Country/Region:
China/Guangdong
Main Products
screw,nut,pin,shaft,standoff,rivet,washer,bolt,tube,bearing
Country/Region:
China/Shanghai
Main Products
DIN980V M5-M24 DIN929 M4-M16 DIN985,DIN982 M2.5-M100 ISO7040 M4-M48 DIN315
Country/Region:
China/Guangdong
Main Products
panel captive screws, panel fasteners assembly, spring-loaded plungers, ball plungers, spring plungers, hand retractable plungers, press fit plungers, thumb screws, captive nuts, self-clinching nuts, self-locking nuts, broaching nuts, cage nuts, flate-in nuts, rivet nuts, welded nuts, self-clinching standoffs, broaching stand-offs, flush fasteners, spacers, Jack screws, studs, threaded inserts for plastic, knurled nuts and screws, pins, latches, rings, handles and ferrules, self clinching cable tie mounts and hooks, CAM locks, and other precision turn parts by your request specially, machined parts
Country/Region:
China/Hebei
Main Products
Blind Rivet Nut Series: Blind Rivet Nut, Flat Head Blind Rivet Nut, Countersunk Head Flat Head Blind Rivet Nut, with Knurl Countersunk Head Blind Rivet Nut, with Knurls Flat Head Half Hex. Rivet Nut Countersunk Head Half Hex. Rivet Nut Flat Head Hexagonal Rivet Nut American Style Small Head Metric Rivet Nut American Style Small Head Blind Rivet Nut American Style Big Head Metric Rivet Nut American Style Big Head Rivet Nut Blind Rivet Stud Series: Blind Rivet Stud, Flat Head Blind Rivet Stud, Countersunk Head Blind Rivet Stud, Big D Flat Head Blind Rivet Stud, Big D Countersunk Head Blind Rivet Stud, Big D Flat Head, with Knurls Rivet Stud, Big D Countersunk Head, with Knurls Hexagonal Blind Rivet Stud American Style Big Head Metric Rivet Stud American Style Big Head Rivet Stud
Country/Region:
China/Zhejiang
Main Products
We are specialized in producing both standard and non- standard fittings, including nuts, screws, bolts,washers and different sizes castors.
Country/Region:
China/Shanghai
Main Products
Main Products: copper. Rivets. Hexagon Stud. Connector. Nut. Communication connectors, such as precision metal parts. Another also in accordance with customer requirements and drawings for special order.
Country/Region:
China/Beijing
Main Products
specializing in all kinds of standard & non-standard precise parts
Country/Region:
China/Zhejiang
Main Products
standard parts, non-standard parts, hardware, stamping, auto parts, rivet sleeve
Country/Region:
China/Guangdong
Main Products
Our Products get widely used in digital photo machine, cell phone, host computer, display, AIO, NB, iPad, LED. We mainly produce screws from M1-M6, e.g.: machine screw, self-tapping screw, triangle self-tapping screw, self-tapping screw with sharp point, self-tapping screw with cutting point, step screw, screw with washer, screw with spring; lathes parts, e.g.: rivet, nut, tin stud, copper pin; spring, e.g.: pressure spring, tension spring, torsional spring, spring screw; stamping part, e.g.: washer, fastener, e-ring. What’s more, we can manufacture all kinds of fasteners and non-standard fasteners according to requirements.
Country/Region:
China/Zhejiang
Main Products
The product mainlyinvolves GB code, the beautiful sign, the German sign, the date sign,the English sign, the ISO standard, the material mainly has 201, 302,304, 316 and so on the material, the product including the screw(M4~M20, length 6~300mm), the screw rod (M4~M20, length 10~1000mm),(M4~M20, length 100~2000mm), the machine screw (M3~M8, length4~60mm), the nut (M3~M30), from attacks the nail (ST2.2~ST6.3, length4.5~45mm); Gasket (diameter Phi 3~ Phi 100mm, thickness 0.6~6mm),about daily production end product 30 tons.
Country/Region:
China/Zhejiang
Main Products
We are a professional manufacturer of non-standard parts with 14 years experiences in China,offering various kinds of auto,motorcycle and diesel engine parts including high-strength bolt,nut,universal parts,auto wheel lockset and hub nut,bolt,non-standard parts and so on.